Keil MCB2140 evaluation board

The Keil MCB2140 Evaluation Board is a 3rd-party development tool that introduces you to the NXP LPC2140 ARM family and allows you to create and test working programs for this advanced architecture.

• NXP LPC2148 microcontroller
• An on-chip USB interface
• Two serial interfaces
• One JTAG interface
• An SD memory card interface
• A speaker
• Analog input (via potentiometer)
• Eight LEDs
• Keil Evaluation Tools for ARM

The evaluation board connects to your PC using the serial port (for flash download) or the JTAG interface. It can be powered from a USB connector (200mA typical) or from a 5V to 9V DC power supply. Debugging is supported via the JTAG interface using the Keil ULINK USB-JTAG adapter and the μVision IDE and Debugger.

• PC with one available serial port
• Windows 95/98/ME/NT/2000/XP
• One CD-ROM drive

• Schematic

• USB Audio Device Example for LPC214x (by Keil) (Feb 6, 2006)
• USB Human Interface Device (HID) Example for LPC214x (by Keil) (Feb 6, 2006)
• USB Mass Storage Device Example for LPC214x (by Keil) (Feb 6, 2006)

Click for datasheet. Also, see datasheet disclaimer.
, , indicate product status. Click or for more or less detail.

	LPC2141		Microcontroller with USB 2.0 full-speed device, 32KB ISP/IAP flash, 10-bit ADC
	LPC2142		Microcontroller with USB 2.0 full-speed device, 64KB ISP/IAP flash, 10-bit ADC, DAC
	LPC2144		Microcontroller with USB 2.0 full-speed device, 128KB ISP/IAP flash, 2x10-bit ADC, DAC
	LPC2146		Microcontroller with USB 2.0 full-speed device, 256KB ISP/IAP flash, 2x10-bit ADC, DAC
	LPC2148		Microcontroller with USB 2.0 full-speed device, 512KB ISP/IAP flash, 2x10-bit ADC, DAC

• NXP LPC2000 Product Family

Part Number OM10072: Keil MCB2140 Evaluation Board

The evaluation board can be purchased from authorized distributors:

• Order Online at Avnet
• Order Online at DigiKey
• Order Online at LPC Tools

• Contact Arrow
• Contact Future

• Keil ULINK USB-JTAG Interface Adapter

• Keil MCB2140 Evaluation Board
• Keil ARM Evaluation Software